Door County cruisers
On a raked bow, compare total number width with the true usable forward panel.
Sturgeon Bay and Door County boating • Custom hull number decals
Design custom WS boat number vinyl for Sturgeon Bay and Door County watercraft. Order registration lettering that fits your actual hull and stays legible during marina and open-water use. For a cruising hull, check where fender lines, rub rails and a long sheer stripe meet the forward display area. Measure from a fixed reference so the left and right layouts can be positioned consistently during installation.
Sturgeon Bay connects working-waterfront and recreational boating routes between Green Bay and Lake Michigan. Cruising boats, fishing craft and sailboats can have very different bow profiles. A long vessel does not necessarily offer a flat number panel, especially where the hull curves into rails and hardware.
Custom-cut lettering shipped to customers; we do not have a Sturgeon Bay retail storefront or issue official registration stickers.
Measure the whole WS number sequence on both sides at the intended display height. Check contrast where a two-tone hull transitions from a dark stripe to lighter gelcoat. If the boat has been stored through Wisconsin winter weather, remove failed lettering carefully and wait for a dry, suitable surface temperature before applying new vinyl.
Before ordering, measure both forward hull sides, the complete assigned number width and the available character height. Federal numbering rules establish a plain vertical block character baseline of at least three inches on vessels subject to state numbering. Consult current Wisconsin rules for exact positioning, spacing, contrast and official validation decal placement.
On a raked bow, compare total number width with the true usable forward panel.
Keep number characters away from fender and docking hardware contact.
Inspect oxidation, wax and moisture before installation.
01 • Match
Copy the actual assigned state prefix, digits and suffix. We do not create or assign official boat IDs.
02 • Fit
Check the full number width, legible character height and a contrasting location on each side.
03 • Preview
Select a suitable block font and finish, then confirm the number, size, production and delivery timing.
Coordinate the look if desired, but use plain legible characters for required registration identification.
No. We manufacture letters for the number already assigned to the vessel; Wisconsin DNR administers the official registration.
Send a photo and measurements for each usable forward hull panel to our customer team. We help with decal sizing; official legal requirements come from the issuing state authority.
Design custom vinyl letters using your officially assigned number and measurements. Preview every character and order online for shipment to your address.
Keep the identifier readable in the required reading direction. A matched pair means two properly readable layouts, not a reversed image of the characters.
Use the exact assigned identifier for registration-number lettering. Plan decorative boat names and any documented-vessel markings separately. Check the relevant state guide, confirm material suitability for the actual surface, and follow the supplied preparation and application instructions.
The current studio submits your design for human-reviewed proof with no payment due at that step. Confirm the reviewed quote, production timing and delivery options before proceeding. Online design and shipping coverage does not imply a local storefront or marina partnership.
Open the studio for a proof request → Ask about material, fit or delivery